Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Impact Windows in Coral Gables: What to Know First
We install, replace, and service ES Windows impact windows throughout Coral Gables, FL as an independent ES Windows service provider. Most single-window repairs on ES Windows impact units run $200 to $900, while full replacements typically land between $1,800 and $4,500 per opening depending on size and series. We carry OEM and quality aftermarket parts for most ES Windows lines and can usually complete a standard repair in one visit.
This page is for homeowners who own ES Windows impact products and want straight answers about how they hold up, what fails, and what a proper fix costs. If you have a fogged lite, a roller that binds, or a frame that is not seating square after a storm season, call us at (954) 507-3613 and describe what you are seeing. A live person answers. We will tell you honestly whether it sounds like a repair or a replacement before anyone schedules a truck.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid impact product, but after enough Miami wet seasons and salt air, certain failures show up more often than the sales brochure leads you to believe. These are the five we see most on service calls across Coral Gables:
- Roller and track wear on the ES Windows 9200 and 9400 sliding door series. Coral Gables homes near water get sand and salt in the bottom track. The factory rollers are decent, but after 10 to 15 years the bearings seize and the panel starts to drag. We replace the rollers with stainless-bearing aftermarket sets that hold up longer than the originals, then clean and align the track so the door glides without leaning on the frame.
- Fogged insulated glass units on the ES Windows 7800 casement and picture window lines. The seal around the spacer fails, moisture gets in, and you get that permanent haze between the panes. This is not a cleaning problem. The glass package needs replacement. We measure the lite, order an impact-rated IGU with the correct Miami-Dade approval, and set it without breaking the munitions or voiding the frame warranty.
- Hardware fatigue on ES Windows ESG-700 casement operators. The crank operator gear strips after years of use, usually in the July humidity when metal is hot and you are cranking against a stiff sash. We replace the operator and check the hinge slides on the same visit, because a new operator on worn hinges will strip out again in a year.
- Weep system blockages on the ES Windows 6500 series single-hung and horizontal sliders. ES frames have weep holes that drain water from the track. In Coral Gables, pollen, dust, and the fine grit from summer downpours clog them. Water pools, then wicks into the frame and eventually into the wall. On every ES Windows service call we clear the weeps and verify the drain path with a water test before we call the job done.
- Stripped or loosened fasteners at the meeting rail on ES Windows impact French doors. These doors carry a lot of weight, and the locking hardware takes the load. When the screws back out or strip the aluminum, the panels sag and the lock no longer engages cleanly. We re-tap the holes, install threaded inserts where the frame allows, and reset the astragal so the doors lock with the handle, not with your shoulder.
Our ES Windows Impact Windows Process
Every ES Windows job we take follows the same order of operations. No shortcuts, no surprises at the end.
- 1
You call, we listen. You describe the symptom, the window or door location, and the model number if you can find it on the frame sticker. We ask enough questions to know whether to bring parts or plan for a measure-and-order.
- 2
We come out and diagnose. A background-checked, uniformed tech measures the opening twice, checks the plumb and level of the existing frame, and inspects the glass package, hardware, and weatherstripping. We write findings on paper you can read.
- 3
We present the fix and the price. If OEM parts are available and warranted, we recommend them. If a quality aftermarket part will outlast the OEM, we say so and explain why. You get a line-item quote before we touch anything.
- 4
We do the work. Glass comes out clean, frames get shimmed square, hardware gets torqued to spec, and every opening gets a water test before the trim goes back on.
- 5
We register both warranty layers before we leave the driveway. That is The Keystone Standard. Your workmanship warranty and the manufacturer coverage get documented in writing on the spot.
- 6
We walk the job with you. You inspect the work, test the window or door, and ask any question you want. The truck does not leave until you are satisfied, and the Done Right Promise covers what we did.
What ES Windows Impact Windows Costs in Coral Gables
Here are honest ranges for what we typically bill on ES Windows work in Coral Gables:
| Service | Typical Range |
|---|---|
| Single roller replacement (sliding door or window) | $100 - $250 |
| Casement operator and/or hinge replacement | $175 - $400 |
| Fogged IGU replacement (per lite, impact-rated) | $400 - $1,100 |
| Full frame window replacement (per opening) | $1,800 - $4,500 |
| Complete impact door replacement (per opening) | $3,500 - $8,500 |
What moves the price: opening size, glass package, whether the frame itself is still square and salvageable, and series-specific hardware. A 9200 sliding door replacement will not cost the same as a 7800 picture window. Call (954) 507-3613 for a free, written estimate. You will know the number before any work begins, and that number will not change unless you change the scope.
Why Coral Gables Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been doing this work in and around Coral Gables for a long time. Dale Kessler grew up here, spent summers on Miracle Mile watching his father re-glaze storefronts, and has measured, set, and sealed windows and doors across this city for nearly two decades. When we take an ES Windows job, we treat it like a product we expect to see again in ten years, because we plan to be here in ten years.
Our Done Right Promise is simple: if the work is not done right, we make it right. No paperwork, no arguing. The Keystone Standard means both manufacturer warranty layers are registered in writing before the truck leaves your driveway. And if your ES Windows unit is beyond saving, we will quote you a replacement side by side against PGT, CGI, CWS, and ECO Window Systems so you can see exactly what your money buys. Call (954) 507-3613 and talk to a person, not a phone tree.
FAQs
No, not when the repair uses approved parts and the original frame is not modified. We are careful about this because we have seen homeowners take a cash bid from someone who drilled extra holes in the frame, and the manufacturer walked away from the warranty when the next claim came in. If it is not in writing, it is not a guarantee - it is just a conversation. We register both warranty layers in writing on every job.
Most of the time, yes. Rollers, operators, weatherstripping, and lock sets for the 6500, 7800, 9200, and 9400 series are available through our supply channels. The challenge is usually the glass package on discontinued sizes, which is why we verify availability before promising a date. Call (954) 507-3613 and we will check your specific model and size.
The answer usually comes down to the frame. If the aluminum is square, the corners are tight, and the only problem is a bad roller, operator, or fogged lite, repair makes sense. If the frame has corrosion at the corners, the miters are separating, or the opening has shifted, you are better off replacing the whole unit. We will tell you which side of that line you are on, and we will quote both options so you can decide with numbers in hand.
Standard repairs are typically scheduled within a few days to a week depending on parts availability. We do not promise same-day service on non-emergency work, because we would rather give you a real date and show up on it. A live person answers our phone 24 hours a day, 7 days a week, so you will talk to someone who can actually schedule the appointment, not a callback form.
Yes. When a job requires a permit, we pull it, pass the inspection, and close it out before we consider the job finished. Coral Gables has its own building department requirements, and we have worked with them long enough to know what passes on the first inspection. That is part of a square deal.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.