Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Coral Gables: What to Know First

We provide independent Mr-Glass custom and geometric window repair, reglazing, and replacement across Coral Gables, typically completing most single-unit jobs in one visit with a written line-item quote before any work begins. As an independent Mr-Glass service provider, we are not bound by a single manufacturer’s parts pipeline, which means we can often source or machine what a Mr-Glass warranty path won’t cover. Custom and geometric windows from Mr-Glass, especially radius tops, trapezoids, and oversized fixed units common in Coral Gables Mediterranean and mid-century homes, fail differently than standard rectangles, and the fix is rarely a simple glass swap.

Call (954) 507-3613

If you own a Mr-Glass shaped window that has fogged, leaked, or started to feel loose in its frame, call (954) 507-3613 and we will schedule a measurement visit, assess the unit, and give you a straight answer on repair versus replacement. This page is written for Coral Gables homeowners who want to know what is actually wrong with their Mr-Glass window before anyone touches it.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass windows in Coral Gables sit through hurricane season, salt air from the coast, and months of high humidity. Shaped units take the worst of it because their frames carry load unevenly. Here are the failures we see most often on Mr-Glass custom and geometric windows in this area, by model line where it matters:

• Mr-Glass radius top units (arched and half-round lines) separating at the curved seam. The curved aluminum or vinyl extrusion is bent to radius at the factory, and over years of thermal cycling, the seal at the apex weakens first. We regularly see Coral Gables homes where the top of an arched Mr-Glass window fogs six months before the bottom shows any sign. The fix is not a full replacement. We remove the glazing, clean the channel, reset the glass with fresh structural sealant, and pressure-test the unit. When the frame itself is distorted beyond tolerance, we quote a new radius unit side by side with the repair so you can see both numbers.
• Mr-Glass trapezoid and triangular units with corner gasket compression. Geometric windows carry stress concentration at the corners. On Mr-Glass trapezoids, particularly the ones installed in gable ends and stairwells in Coral Gables, the corner gaskets compress and take a set, opening a small but persistent air and water path. The symptom is a draft you can feel with the back of your hand on a windy day, or a faint water stain at the corner drywall. We replace the gasket with an OEM-spec profile, re-square the sash if needed, and caulk the exterior perimeter with a marine-grade sealant rated for South Florida UV.
• Mr-Glass oversized fixed units with failed structural glazing tape. Large fixed picture windows and big geometric openings use structural glazing tape to bond glass to frame. In Coral Gables, where afternoon sun beats on west-facing walls, that tape degrades and the glass begins to move microscopically in the frame. You will hear a low creak on hot afternoons or see a hairline gap at the glazing bead. We remove the glass, strip the old tape, and re-bond with a structural silicone system rated for the wind loads in your specific Coral Gables neighborhood, not a generic off-the-shelf product.
• Mr-Glass custom casements and awnings with operator wear at non-standard angles. Shaped casement and awning windows that open have more hardware stress than fixed units because the hinge geometry is fighting the shape. On Mr-Glass geometric operable windows, we see crank operators strip, hinge arms sag, and locking points miss by a quarter inch. We carry and order OEM Mr-Glass hardware where it is still available, and when a part has been discontinued, we source quality aftermarket components that match the original load rating. We never rig a shaped window with a hardware part meant for a rectangular sash.
• Mr-Glass impact-rated shaped units with scratched or chipped laminated glass. On Coral Gables homes built after the 2002 building code changes, many Mr-Glass custom windows are impact-rated. The laminated interlayer means a chip or scratch cannot just be polished out without compromising the unit. We assess the damage against Miami-Dade product approval requirements, and when replacement glass is needed, we order it with the correct impact rating for your specific window opening. This is not a place to save money with a non-rated pane.

Our Mr-Glass Custom & Geometric Windows Process

Every Mr-Glass job we take in Coral Gables follows the same sequence, whether it is a simple reglaze or a full shaped-unit replacement:

1. 1
   The call. A live person answers at (954) 507-3613, any hour. We ask about the window, the shape, and what you have noticed. We schedule a measurement visit at a time that works for you.
2. 2
   The measurement and diagnosis. A background-checked, uniformed technician measures every opening twice, checks the frame for square and plumb, and identifies the specific failure. On Mr-Glass shaped units, we photograph the corners and the glazing channel so the quote is based on what is actually there, not a guess from the curb.
3. 3
   The written quote. We put OEM and quality aftermarket options side by side on paper, with line-item pricing and the warranty duration stated for each. If it is not in writing, it is not a guarantee. It is just a conversation. You decide with real numbers in front of you, not a sales pitch.
4. 4
   The work. We do the repair or replacement on schedule, protect the interior and exterior work area, and keep the job contained. For custom and geometric units, we dry-fit the glass before final setting to confirm the radius and corner tolerances match the opening.
5. 5
   The test and walk-through. Every Mr-Glass job gets a water test on the glazing perimeter and a hardware cycle test on operable units. We walk you through what we did and what to watch for.
6. 6
   The guarantee. Before our truck leaves the driveway, both warranty layers, manufacturer and workmanship, are registered in writing with durations stated. Our Done Right Promise covers the workmanship. If the pane is not true, the job is not done.

What Mr-Glass Custom & Geometric Windows Costs in Coral Gables

Here are the price ranges we typically see for Mr-Glass custom and geometric window work in Coral Gables. These are honest starting points, not bait. Your exact price depends on the unit size, glass type, and what we find during measurement.

• Reglaze a Mr-Glass shaped fixed unit (fogged seal, no frame damage): $350 to $700 per unit depending on size and glass type.
• Corner gasket replacement on a Mr-Glass trapezoid or triangle: $200 to $450 including exterior re-caulking.
• Hardware replacement on a Mr-Glass operable shaped casement or awning: $250 to $600 depending on part availability, OEM versus aftermarket.
• Full replacement of a Mr-Glass arched or radius top window with a new custom unit: $1,200 to $3,800 depending on dimensions, impact rating, and frame material.
• Structural re-bond on a Mr-Glass oversized fixed or geometric unit: $800 to $2,200 including glass removal, surface prep, structural silicone, and water testing.

What moves the price: glass size, impact rating, whether the frame can be reused or must be rebuilt, and the accessibility of the opening. A second-story arch over a Coral Gables staircase costs more than a first-floor triangle at arm’s reach. That is fair, and the quote will show every line. Call (954) 507-3613 for an exact price after measurement. Estimates are free.

Why Coral Gables Homeowners Call TruePane Windows & Doors for Mr-Glass Work

Our founder, Dale Kessler, grew up around Coral Gables, watching his father re-glaze storefronts and residential sidelights near the Miracle Mile before he was old enough to carry the caulk gun unsupervised. He trained in building construction technology at Miami Dade College and learned to read Miami-Dade product approval numbers and load specs the way most people read a menu. That background matters when a Mr-Glass shaped window has a problem that is not covered by the manufacturer anymore.

We stand behind the work. Every Mr-Glass job carries our Done Right Promise in writing. We answer the phone with a live person 24 hours a day, not a voicemail tree. We show up when we say, in uniform, with a background check on file. And because we are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, we can give you an honest side-by-side comparison if a Mr-Glass replacement does not make sense for your home. A square deal means you see the numbers and decide.

FAQs