Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterArched & Custom Doors in Coral Gables, FL
Arched and custom door installation in Coral Gables typically ranges from $2,800 to $7,500 per opening, depending on the material, glass specifications, and structural reinforcement required for local hurricane codes. Because arched units require precision framing and custom-fitted casings, these installations often take longer to manufacture and install than standard rectangular doors. At TruePane Windows & Doors, we specialize in our Door Installation services for these complex openings, ensuring that every curve is sealed properly against the humid Florida climate. If you are looking to replace a custom entry or add architectural detail to your home, please call us at (954) 507-3613 for a free estimate.
Coral Gables architecture demands a specific level of craftsmanship. From the Mediterranean Revival estates on Riviera Drive to the historic homes near the Biltmore, many properties feature non-standard openings that require more than a “one-size-fits-all” solution. When you choose us for your Door Installation in Coral Gables, you are working with a team that respects the structural integrity of your home. We understand that an arched door is not just an entry point; it is a focal piece that must operate smoothly for decades. We do not use subcontractors. Our uniformed technicians measure every opening twice, and we stand by our work with the Done Right Promise.
When You Need Arched & Custom Doors
Replacing an arched or custom door is rarely about just changing the aesthetic. Usually, there are structural or performance reasons that bring homeowners looking for Bifold & Folding Doors and other custom solutions to our shop. We see these specific issues across Coral Gables regularly:
- Binding and Friction: Over time, the heavy wood or composite materials in arched doors can settle or warp due to the intense South Florida heat and moisture, causing the door to rub against the frame. If your door is difficult to open or close, the frame or the hinges may have shifted beyond the point of simple adjustment.
- Failed Weather Seals: Arched tops are notorious for developing gaps if the original installation was not perfectly plumb. We often find that older custom doors allow water intrusion during heavy tropical storms because the weather stripping no longer makes contact with the curved arch.
- Impact Resistance Upgrades: Many older homes in the Gables feature beautiful, non-impact wood doors that do not meet current hurricane safety codes. We replace these with custom-manufactured impact-rated doors that maintain the original architectural curve while providing the protection your insurance company requires.
- Rot and Decay: Wood door frames in this climate are susceptible to rot, especially at the base of the jamb where water pools during the rainy season. If you see soft wood or peeling paint at the bottom of your custom door, it is time to check the integrity of the frame before the damage spreads to your interior walls.
- Drafty Glass Inserts: If your custom door includes decorative glass that has fogged up or lost its seal, the energy efficiency of your entryway is compromised. We can source custom glass inserts that match your existing design while improving your home’s thermal performance.
If you recognize any of these signs, it is better to address them before the next storm season. We provide upfront, transparent pricing, so you know exactly what you are paying for before we begin. Call (954) 507-3613 to discuss the specific needs of your home.
Our Arched & Custom Doors Process
We do not operate like a franchise with a rigid, one-size-fits-all playbook. We follow a specific, craft-based approach to every custom install. This ensures that when we leave your property, the door operates exactly as it should. Our process is built on the founding rule Dale Kessler keeps on our whiteboard: if the pane is not true, the job is not done.
- The Precision Measurement Visit: We send a senior technician to your home to measure the opening. With arched doors, standard measurements are insufficient. We account for the radius of the arch, the depth of the jamb, and the specific materials of the surrounding wall to ensure a perfect fit.
- Side-by-Side Manufacturer Selection: We are an authorized installer for brands like PGT, and CGI. We bring actual product samples and spec sheets to your kitchen table. We show you the differences in frame construction and glass impact ratings so you can compare your options side-by-side on paper.
- Registered Warranty Setup: We believe a warranty is only as good as its registration. Before we ever pick up a tool, we ensure both the manufacturer’s warranty layers are registered in your name. You receive this documentation in writing before we start the install, so there are no surprises later.
- The Installation Day: Our technicians arrive in uniform, prepared for the specific complexities of your opening. We remove the old door carefully, inspect the sub-framing for rot or moisture damage, and install the new unit using high-grade sealants and hardware. We do not rush; we ensure the door is plumb, level, and square.
- The Done Right Promise: Once the job is complete, we walk you through the operation of your new door. We stand behind our workmanship for 90 days. If the door binds, the seal fails, or anything else goes wrong, we come back and fix it without an argument or extra fees.
Arched & Custom Doors Pricing in Coral Gables
Pricing for custom door work is inherently variable because no two custom openings are identical. However, we provide clear, upfront estimates so you can make an informed decision. When you call us, we can often give you a ballpark range based on the dimensions and material type, followed by a firm written quote after our on-site assessment.
| Door Type | Estimated Cost Range |
|---|---|
| Standard Replacement (Non-Arched) | $1,500 - $3,200 |
| Custom Arched Entry (Standard Material) | $2,800 - $4,500 |
| High-Impact Custom Arched Door | $4,500 - $7,500+ |
| Custom Glass & Frame Modification | $900 - $2,200 |
Factors like custom hardware, intricate glass patterns, and the need for new framing will influence the final cost. We offer a permanent 5% discount for seniors and veterans, and we have a standing a free written repair estimate. Please call (954) 507-3613 to schedule a free estimate. We do not use high-pressure sales tactics; we simply provide the information you need to decide if we are the right fit for your home.
FAQs - Arched & Custom Doors
Can you match the exact style of my existing historic door?
Yes, we specialize in replicating architectural details for older homes in Coral Gables. We work with manufacturers who can create custom radius tops and Double & French Doors with decorative glass inserts that mimic the original design while incorporating modern materials and impact-rated glass. Call us at (954) 507-3613 to discuss your design requirements.
How long does it take to get a custom arched door?
Because these doors are manufactured to order, lead times are longer than for standard rectangular doors, typically ranging from 8 to 14 weeks. We provide a firm timeline at the time of your estimate so you know exactly when to expect the installation, and we stay in communication until the product arrives at our facility.
Is it better to repair an arched door or replace it entirely?
If the issue is minor, such as a hardware malfunction or a simple weather-strip failure, a repair is often the most cost-effective solution. However, if the wood frame has structural rot or the door no longer meets current safety codes, a full replacement is usually the better long-term investment. We will always give you an honest assessment of whether a repair is worth the cost or if a new unit is the smarter choice. Call (954) 507-3613 for an honest evaluation.
Do you handle the permit process for exterior door replacements?
Yes, we handle all necessary permitting for door installations in Coral Gables. Replacing an exterior door often triggers a requirement for current hurricane code compliance, and we ensure all paperwork is filed correctly with the city. We take care of the administrative work so you do not have to worry about the inspection process.
If you have questions about your specific project, the team at TruePane Windows & Doors is ready to help. We are a family-oriented company that has served this community since 2008, and we plan to be here for many more. Whether you need a simple adjustment or Entry & Swing Doors for a full custom installation, we treat your home with the care it deserves. Contact us today at (954) 507-3613 to schedule your free estimate and learn more about our commitment to the Keystone Standard.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Gables.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.