Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Coral Gables, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CWS service across Coral Gables. We’re not a CWS-authorized dealer, so we approach every job with a plain repair-first assessment rather than a pitch to replace. The one thing that makes our CWS work different here is simple: we know Coral Gables has a second gatekeeper besides Miami-Dade County. Every CWS window or door you touch has to satisfy the City of Coral Gables Board of Architects too. Call (954) 507-3613 and we’ll walk you through exactly what that means for your home.
Why Coral Gables Residents Choose Us for CWS Service
Our crew has been servicing CWS windows and doors across Coral Gables for over a decade, diagnosing and repairing these systems as an independent specialist. That means we’re not bound by manufacturer replacement quotas, and we don’t have a vested interest in convincing you to scrap a frame that still has years left in it. We repair whenever it is safe and cost-effective. We replace only when frame integrity or HVHZ compliance is compromised.
Dale Kessler, our owner, grew up in the Coral Gables area and spent summers near Miracle Mile watching his father re-glaze storefronts and residential sidelights before he was old enough to carry a caulk gun unsupervised. That familiarity with the city’s older masonry homes shapes how we approach CWS equipment installed in them. Our CWS sales & service work is built on that foundation, and our Coral Gables service area coverage reaches every corner of the city.
Common CWS Windows & Doors Problems We Solve in Coral Gables
- Fogged CWS 800 Series sliding glass doors. Salt air from Biscayne Bay saturates the desiccant in the spacer bar far faster than the manufacturer’s inland lifespan estimates. We see 800 Series doors fogging within five to seven years of installation in Coral Gables homes, and we address it at the seal level rather than treating the symptom.
- Corroded CWS 700 Series casement hardware. Marine air pits the factory finish on hinges and locking levers within five to seven years of exposure. Homes east of Old Cutler Road get it worst. We replace the hardware with stainless steel components that hold up better than the originals.
- Binding CWS 500 Series single-hung sashes. Coral Gables’ thick masonry walls and original steel or wood rough openings from the 1920s-1940s mean some CWS frames were installed shallow and have shifted over time. The sash binds, the lock won’t seat, and the homeowner assumes the window is shot. Often it just needs the frame reset properly.
- Failed thermal breaks in CWS aluminum frames. Homes within a mile of the bay see interior condensation and water stains on stucco reveals because the thermal break has failed. This is a material failure of the frame, not the homeowner’s humidity control. We can assess whether the frame is salvageable or if full replacement is the honest answer.
- Leaking CWS 300 Series awnings during heavy rain. An impact rating does not guarantee a watertight seal. Weep systems clog, gaskets flatten, and the seal around the rough opening fails. In Coral Gables’ summer downpours, a small leak announces itself fast.
CWS Service in Coral Gables: What Local Conditions Mean for Your Equipment
Every CWS window and door replacement in Coral Gables must clear two independent gatekeepers before any work can begin. The first is Miami-Dade County’s High-Velocity Hurricane Zone product approval, which requires a Notice of Acceptance on every unit. The second is the City of Coral Gables Board of Architects, which enforces a 1920s Mediterranean Revival aesthetic that no other South Florida municipality applies with the same force. A standard white vinyl impact window that passes without comment in Miami gets flagged here for frame width, muntin pattern, or finish color. We’ve seen NOA-certified units pulled out of openings because the Board rejected the sightline. Our pre-permit architectural vetting is the make-or-break step no generic Miami-Dade contractor performs. If the Board is going to reject something, you want to know before you buy it, not after it’s installed. That’s how our CWS sales & service process protects your project in Coral Gables.
Our tech repaired a CWS 700 Series casement window on De Soto Boulevard where salt-air corrosion had seized the stainless steel hinge arms and cracked the seal. We installed marine-grade aftermarket hinges and a new OEM gasket, then recalibrated the operator to meet the Board of Architects’ original slender-profile look. No full replacement required, and the window holds plumb and passes a water test to this day.
CWS Models & Products We Service in Coral Gables
We work on the CWS product lines most commonly installed across Coral Gables homes, including the 700 Series Casement, 800 Series Sliding Glass Door, 500 Series Single-Hung, and 300 Series Awning. When parts are needed, we use OEM CWS components whenever available. For discontinued hardware, we source marine-grade aftermarket equivalents, especially stainless steel hinges and rollers, that outperform the original in salt air. Our van is stocked with the common failure items for these models so we can resolve most repairs on the first visit rather than returning a week later with parts. We don’t peddle generic substitutes. We tell you what we’re putting in your window, in writing, before any work starts.
CWS Service Pricing in Coral Gables
CWS repair costs in Coral Gables depend on what has actually failed. A seized hinge or a flat gasket is a different job than a failed thermal break or a fogged 800 Series door panel. The latter requires a new insulated glass unit, and because Coral Gables homes demand HVHZ-compliant glazing, that unit has to meet Miami-Dade standards and satisfy the Board of Architects profile expectations. We give you a written line-item estimate before work begins, so you see the parts cost, the labor cost, and the warranty terms on paper. You’ll also see whether repair or replacement is the smarter money. Call (954) 507-3613 to schedule your free estimate.
If it is not in writing, it is not a guarantee - it is just a conversation.
Serving Coral Gables, FL - Our Local Coverage Area
We’re based in the Coral Gables area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Coral Gables
My CWS sliding glass door fogs up every morning in Coral Gables - is that just normal humidity?
No. Morning fogging between the panes means the seal on your CWS 800 Series door has failed and the desiccant is saturated. In Coral Gables, salt air from Biscayne Bay accelerates that failure. A new insulated glass unit fixes it, and we’ll confirm the replacement glass meets HVHZ standards. Call (954) 507-3613 for an exact quote.
Can you restore the original finish on my CWS windows without triggering Board of Architects objections?
Yes, in most cases. Frame restoration, hardware replacement, and finish work are maintenance, not replacement, so the Board of Architects does not need to review them the way it reviews a full unit swap. We match the original profile and finish so the work blends with your home’s Mediterranean Revival character.
Why does my CWS casement window leak water during heavy rain even though it’s impact-rated?
An impact rating covers windborne debris, not water. Leaks come from failed gaskets, clogged weep systems, or a seal that has pulled away from the rough opening. In Coral Gables’ heavy summer rains, the problem shows itself quickly. We trace the leak to its source and repair it there, rather than caulking over the symptom. Call (954) 507-3613 and we’ll come look.
Are CWS windows from the 1980s still repairable in Coral Gables, or should I replace them?
Depends on the condition of the frame and the glazing. If the aluminum frame is sound and the original seal system isn’t compromised, most 1980s CWS hardware can be replaced with modern marine-grade components. We repair when it’s safe and cost-effective, and we’ll tell you plainly when a full replacement is the better use of your money.
Do you handle the Board of Architects paperwork for CWS window replacements in Coral Gables?
Yes. We prepare the architectural review package, coordinate the submittal, and make sure the product you selected will pass before we order it. That pre-permit vetting has saved Coral Gables homeowners from paying for windows that get rejected and torn out. Estimates are free at (954) 507-3613.
Service Areas Near Coral Gables
We serve Coral Gables and the surrounding communities, including CWS service in Pinecrest, CWS service in Olympia Heights, Coral Terrace, Glenvar Heights, and Key Biscayne. Each area has its own conditions, but the same repair-first standard applies everywhere we work.
Book Your CWS Service in Coral Gables Today
Call (954) 507-3613 to schedule your CWS service visit. A live person answers the phone, and we’ll set a time that fits your schedule. Most repairs are completed in a single visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Gables since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.