Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Coral Gables: What to Know First
We replace and install Therma-Tru roof systems for homeowners across Coral Gables, and most jobs are completed within two to five days once materials arrive. As an independent Therma-Tru service provider, we quote the work honestly: you will see the full price on paper before we start, and it will not change after the job begins. If you own a Therma-Tru roof and it is aging, leaking, or failing inspection, call (954) 507-3613 for a free estimate and a straight answer about what needs to be done.
This page is written for Coral Gables homeowners who have lived with a Therma-Tru product for years and need to know what replacement actually involves here: the climate, the codes, and the cost. Not a brochure. The facts.
Key Takeaways
- Therma-Tru roofing systems in Coral Gables face salt air, high UV, and hurricane wind uplift. These are not optional considerations.
- We are an independent Therma-Tru service provider, not a manufacturer-authorized dealer. That means we recommend what is best for your roof, not what protects a corporate sales quota.
- Every Therma-Tru job we do is backed by our Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave the driveway.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds solid roofing components, but Coral Gables is a hard place for any roof. We have pulled apart enough of them to know where the failures actually happen. Here is what we see in the field:
- Flashing separation at the eave line. On Therma-Tru’s Classic Rib and Standing Seam profiles, the eave flashing is often sealed with a butyl tape that breaks down after eight to ten years of South Florida UV exposure. The symptom is water staining on the fascia board, not necessarily a visible roof leak. We strip the old flashing, inspect the decking underneath, and reseal with a higher-grade aluminum flashing and a sealant rated for continuous sun exposure.
- Fastener back-out on the Ridge Cap series. The Ridge Cap system uses exposed fasteners with neoprene washers. In Coral Gables, those washers dry out and crack, and the fasteners start backing out from thermal expansion. Owners hear a faint clatter on windy nights. We replace every fastener with a larger-diameter, high-tensile screw and a fresh EPDM washer, then torque them to spec. Patch-and-go jobs do not hold here.
- Condensation staining under the DeckShield underlayment. This one surprises owners. Therma-Tru’s DeckShield underlayment can trap moisture between itself and the plywood deck when attic ventilation is insufficient. Coral Gables humidity makes it worse. The fix is not a new roof: it is correcting the ventilation balance first, then replacing the affected underlayment sections. We have saved homeowners thousands by catching this before they paid for a full tear-off.
- Hail and wind damage on the ShingleStone line. Therma-Tru’s ShingleStone composite product performs well, but after a hurricane season, we regularly find cracked tiles along the leading edge of the rake. The tile material is durable, but the impact rating has limits. We replace damaged tiles and verify the remaining field is still watertight. If it is not, we say so plainly and quote the full replacement.
- Seam separation on older Therma-Tru StormMaster roofs. The StormMaster line was designed for coastal wind uplift, but the seam design on units installed before 2012 had a tendency to open under sustained pressure cycles. The tell is a small gap that opens and closes with temperature changes. We re-crimp the seams and apply a seam sealant matched to the original metal, which keeps the roof weathertight without a full panel replacement.
Our Therma-Tru Roof Replacement & Installation Process
Here is how a Therma-Tru roof replacement or installation actually goes when you call TruePane Windows & Doors:
- 1
We come out and look at the roof. A tech gets up on the roof, walks every section, and documents what is there. Photos, measurements, notes. No guesswork from the ground.
- 2
We write a line-item quote. You get the full scope, the materials, the labor, and the price on paper. Side by side if you want to compare product options. No surprise changes later.
- 3
We decide on parts together. For Therma-Tru work, we recommend OEM parts where they matter for warranty and structural integrity, and we will tell you honestly when a quality aftermarket part does the same job for less. You make the call with the facts in front of you.
- 4
We do the replacement or installation. Uniformed, background-checked technicians. We protect the property, keep the job site clean, and work like it is our own mother’s house.
- 5
We test everything. Water test on the seams, fastener check on every panel, and a visual inspection against the original Therma-Tru installation specs.
- 6
We register the warranties in writing before we leave. The Keystone Standard: both warranty layers registered, durations stated, documents handed to you. Dale Kessler’s rule holds: if it is not in writing, it is not a guarantee - it is just a conversation.
What Therma-Tru Roof Replacement & Installation Costs in Coral Gables
Therma-Tru roof work in Coral Gables is priced by the square foot, and the range depends on the product line, the deck condition, and whether we are doing a repair or a full tear-off. Here is what you can expect based on jobs we have completed in the area:
| Scope | Typical Range in Coral Gables |
|---|---|
| Flashing replacement and reseal (per eave section) | $450 - $900 |
| Fastener replacement on Ridge Cap (full ridge) | $300 - $650 |
| Underlayment section replacement (per 10×10 area) | $800 - $1,500 |
| StormMaster seam re-crimp and seal (per seam) | $150 - $400 |
| Full Therma-Tru roof replacement (per square foot, installed) | $7.50 - $12.00 |
What moves the price: the condition of the decking underneath, the pitch of the roof, and whether we need to pull permits. Coral Gables has specific wind-load requirements, and a permit inspection is part of most replacement jobs. We handle the permit and the inspection. Call (954) 507-3613 for a free estimate and an exact number for your roof.
Why Coral Gables Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have been serving Coral Gables and the surrounding neighborhoods since 2008, and we plan to be here in thirty more. We are not a franchise operation with a regional call center. When you call TruePane Windows & Doors, a live person answers, every time, 24 hours a day. Not a voicemail tree.
Our techs know Therma-Tru products because they have worked on them, not because they watched a training video. And if your Therma-Tru roof is part of a larger exterior project, we also service PGT, CGI, CWS, and ES Windows, so you do not need to juggle three different contractors. Every job carries the Done Right Promise: if it is not done right, we make it right, no paperwork fights and no arguing.
FAQs
That depends on how the work is done. If the installation does not follow the Therma-Tru published installation specs, the manufacturer can deny a warranty claim. That is why we follow the specs exactly and register both warranty layers in writing. As an independent service provider, we are careful to keep your coverage intact. Call (954) 507-3613 and we will walk you through what applies to your specific roof.
Most full replacements take two to five days once materials are on site. Repairs like flashing or fastener replacement are usually done in a single visit. Coral Gables permit inspections can add a day or two depending on the city schedule, and we manage that process for you.
Usually, yes. We match the product line and the color as closely as the current Therma-Tru catalog allows. If the original product has been discontinued, we will show you the closest available match side by side on paper before we order anything.
Estimates are free. A technician comes out, inspects the roof, and gives you a written line-item quote. You will know exactly what we recommend, what it costs, and why. Call (954) 507-3613 to schedule yours.
Get Your Free Therma-Tru Roof Estimate in Coral Gables
If your Therma-Tru roof is showing its age or you are planning a replacement, call (954) 507-3613 today. We will come out, look at the roof, and give you a written estimate with the full price on paper. No pressure, no surprise charges, and a live person on the phone when you call. That is how we have done it in Coral Gables since 2008.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.